M. Dieckmann Diamond Tools
Manufacturing Ltd.
|
M. Dieckmann Diamond Tools Manufacturing Ltd. |
Tools and equipment for civil engineering
|
|
DIAMOND DRILLING BITS TYPE 2000
Thin kerf bits for low power drills, especially for hand held machines. Ringsintered, 9 mm impregnated. 2.5 mm kerf. Best for fastening. Usage: drilling of concrete, bricks, marble, granite and refractory materials. Standard sizes from Ø 10 - 100 mm Standard usable lenght up to Ø 12 mm = 200 mm, from Ø 14 mm = 300 mm Thread G 1/2" Other Ø on request. Nonstandard usable lengths or threads on request. In case of order please note the material to drill. |
|
|
DIAMOND DRILLING BITS TYPE 8000
Thick kerf, ringsintered bits, 9 mm impregnated. To be used with drills from 2.0 kW. Usage: reinforced concrete, bricks, asphalt, etc. In case of order please note the material to drill. Kerfs: Ø 18 - 48 mm = 3.5 mm, Ø 50 - 112 mm = 4.0 mm, Ø 122 - 212 mm = 4.5 mm, Ø 220 - 250 mm = 5.0 mm Standard sizes from Ø 18 - 250 mm Standard usable length up to Ø 212 mm = 400 mm, from Ø 220 mm = 450 mm, thread 1-1/4" UNC Other Ø on request. Nonstandard usable lengths or threads on request. |
|
|
DIAMOND RINGS
Diamond rings for self resetting of our types 2000 and 8000. Other than single segments rings are more stable and more quit running while drilling. All diamond rings are available in seven different matrix hardnesses. All matrixes are free of cobalt. |
|
|
DIAMOND DRILLING BITS TYPE 5000 / 5001
Set with single segments, 7mm impregnated. The segments match the radius of the related bits. To be used with drills from 2.0 kW. Usage: reinforced concrete, bricks, marble, asphalt, etc. In case of order please note the material to drill. Our standard segment dimensions: Ø 52 - 112 mm = 24 x 3.5 x 7 mm, Ø 122 - 212 mm = 24 x 4.0 x 7 mm, Ø 250 - 600 mm = 20 x 4.5 x 7 mm Standard usable length 400 mm (from Ø 250 mm = 450 mm). Nonstandard usable lenghts on request. Typ 5000: open tube, to be used with clamp device Typ 5001: closed tube with thread as requested (standard = 1-1/4" UNC) |
|
|
DIAMOND DRILLING BITS TYPE ASPHALT
Thick kerf, ringsintered drilling bit especially for drilling asphalt. Available in following dimensions: Ø 58 x 50 mm, Ø 107 x 99 mm, Ø 112 x 103 mm and Ø 162 x 153 mm. Standard usable length 400 mm. Other Ø and nonstandard usable lenghts on request. With thread connection 1-1/4" UNC or as requested or with open tube to be used with clamp device. DRILLING BIT CLAMP DEVICES The clamp device is used for drilling bits type 5000 or asphalt as connection of the bit to the drilling machine. Thread connection 1-1/4" UNC. The sizes of the clamp devices correspond to the diameters of the bits. |
|
|
SPECIAL TOOLS
Beside a.m. drilling bits we also produce special tools on request, like milling tools, grinding tools, special drilling bits for the refractory industry, etc. |
|
|
WATERSWIVELS
For regular hand drills up to 1.0 kW. Available with a 12 mm cylindrical pin to be used with the drill chuck or with a 1/2"-20 UNF box thread to be used with the drill shaft. Drilling bit connection thread G 1/2" box. |
|
|
EXTENSION RODS
Those are necessary when drilling deeper than the length of the bit. Following dimensions are available: G 1/2": 100, 200 and 300 mm long (from bit-Ø 32 mm) 1-1/4" UNC: 100, 200, 300, 400 and 500 mm long (from bit-Ø 50 mm) THREAD ADAPTORS If the thread of the bit does not match the thread of the drill a thread adaptor is necessary. |
|
|
CORE CATCHERS
Those are useful tools to get the core out of the hole. The sizes of the core catchers correspond to the diameters of the bits. |
|
|
RIBBON WRENCH
Those are usefull tools to break and unscrew drilling bits from the drilling machines. They avoid the destruction of the tubes if they are used close to the clamp device or thread connection. |
|
| e-mail: info@dd-germany.com |